Auto Light Illumination Level Setting
WARNING: This page is about a different car, the 2007 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the M-MDS to the DLC-2 (16-pin).
- After the vehicle is identified, select the following items from the initial screen of the M-MDS.
When using the IDS (laptop PC)
- Select "Module programming".
When using the PDS (Pocket PC)
- Select "Programming".
- Select "Module programming".
- Select "Programmable Parameters".
- Select "Exterior Lighting".
- Select "Autolamp On Setting - (GEM)".
- Select "Standard" other or "Low other" on the M-MDS to set the illumination level.