LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> External Pages >> Different car >> Section 666 (Security System And Locks System) >> Trunk Lid Key Cylinder Removal/Installation

Trunk Lid Key Cylinder Removal/Installation

WARNING: This page is about a different car, the 2007 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the trunk lid trim. (See TRUNK LID TRIM REMOVAL/INSTALLATION .)
  3. Detach the rod from the trunk lid key cylinder.
  4. Disconnect the trunk lid key cylinder connector.
  5. Remove the nuts, then remove the trunk lid key cylinder.
  6. Install in the reverse order of removal.
    Fig 1: Trunk Lid Key Cylinder & Torque Specification
    G04956869Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals