LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> External Pages >> Different car >> Section 666 (Security System And Locks System) >> Liftgate Lock Striker Removal/Installation

Liftgate Lock Striker Removal/Installation

WARNING: This page is about a different car, the 2007 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION .)
  2. Remove the bolts, then remove the liftgate lock striker.
  3. Install in the reverse order of removal.
  4. Adjust the liftgate. (See LIFTGATE ADJUSTMENT .) BOLT
    Fig 1: Liftgate Lock Striker & Torque Specification
    G04956848Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals