Data Monitoring And Recording Procedure: Notes
WARNING: This page is about a different car, the 2007 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the M-MDS or equivalent to the DLC-2 (16-pin).
- After the vehicle is identified, select the following items from the initial screen of the M-MDS.
When using the IDS (laptop PC)
- Select the "Toolbox" tab.
- Select "DataLogger".
- Select "Modules".
- Select "IC".
When using the PDS (Pocket PC)
- Select "Module Tests".
- Select "IC".
- Select "DataLogger".
- Verify the data monitor items.