LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> External Pages >> Different car >> Section 583 (Front Suspension System) >> Front Shock Absorber And Coil Spring Disassembly/Assembly >> Upper Spring Seat Installation Note

Upper Spring Seat Installation Note

WARNING: This page is about a different car, the 2007 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the mark on the upper spring seat with the dust boot projection.
    Fig 1: Aligning Mark On Upper Spring Seat With Dust Boot Projection
    G04318114Courtesy of MAZDA MOTORS CORP.
  2. Install the upper spring seat so that the upper spring seat stud is at a 27°-33°  angle to the shock absorber installation shaft (lower side).
    Fig 2: Identifying Upper Spring Seat Stud Angle
    G04318115Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals