LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic [Engine Control System L3 With TC] >> On-Board Diagnostic Test >> Diagnostic Monitoring Test Results Access Procedure

Diagnostic Monitoring Test Results Access Procedure

  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
    • When using the IDS (laptop PC)
      1. Select the "Toolbox" tab.
      2. Select "Powertrain".
      3. Select "OBD Test Modes".
      4. Select "Mode 6 On-Board Test Results".
    • When using the PDS (Pocket PC)
      1. Select "OBDII Modes".
      2. Select "Mode 6 On-Board Test Results".
    3. Fig 1: Locating DLC-2 Connector
    G04324072Courtesy of MAZDA MOTORS CORP.
  3. Verify the diagnostic monitoring test results according to the directions on the screen.
scientia non olet · About LEMON Manuals