LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 6 Mazdaspeed >> Repair and Diagnosis >> Electrical >> Starter >> Starting System (L3 With TC) >> Starter Interlock Switch Inspection >> Continuity Inspection

Continuity Inspection

  1. Disconnect the starter interlock switch connector.
  2. Verify that the continuity is as indicated in the table.
    • If there is any malfunction, replace the starter interlock switch.
      Fig 1: Checking Starter Interlock Switch Continuity
      G04325105Courtesy of MAZDA MOTORS CORP.
      Fig 2: Identifying Starter Interlock Switch Connector Terminals
      G04325106Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals