LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 5 Touring, 2.3 L >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic [Engine Control System L3) >> On-Board Diagnostic Test >> PID/DATA Monitor and Record Procedure

PID/DATA Monitor and Record Procedure

NOTE: The PID/DATA MONITOR function monitors the calculated value of the input/output signals in the PCM. Therefore an output device malfunction is not directly indicated as a malfunction of the monitored value for the output device. If a monitored value of an output device is out of specification, inspect the monitored value of the input device related to the output control.
  1. Connect the M-MDS or equivalent to the DLC-2.
    Fig 1: Identifying Data Link Connector (DLC-2)
    G04315948Courtesy of MAZDA MOTORS CORP.
  2. After the vehicle is identified, from the initial screen select the following items:
    • When using the IDS (laptop PC) 
      1. Select the "Tool Box" tab
      2. Select "Self test"
      3. Select "Modules"
      4. Select "PCM"
    • When using the PDS (Pocket PC) 
      1. Select "Modules tests"
      2. Select "PCM"
      3. Select "Self test"
  3. Select the PID from the PID table.
  4. Verify the PID data according to the directions on the screen.
scientia non olet · About LEMON Manuals