Rearview Mirror Removal/Installation

Insert a tape-wrapped flathead screwdriver into the notch and pry with the screwdriver in the direction shown by the arrow to remove the covers. (Vehicles with auto wiper system)

Fig 1: Inserting A Tape-Wrapped Flathead Screwdriver Into Notch
Courtesy of MAZDA MOTORS CORP.
Remove the covers. (Vehicles with auto wiper system)
Remove the rain sensor. (Vehicles with auto wiper system) (See RAIN SENSOR REMOVAL/INSTALLATION ).

Fig 2: Removing Rear View Cover
Courtesy of MAZDA MOTORS CORP.
Remove the clip, and then remove the rearview mirror upward.
Install in the reverse order of removal.

Fig 3: Removing Rearview Mirror Upward
Courtesy of MAZDA MOTORS CORP.