Specifications Index
MAZDA5 SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | HVAC TECHNICAL DATA | ||
| Torque | See Torque Specifications in appropriate graphics under HEATER, VENTILATION & AIR CONDITIONING (HVAC) -- BASIC SYSTEM . | ||
| Axle Nut/Hub Nut (Front) | 174-202 Ft. Lbs. (235-274 N.m) | ||
| Battery | BATTERY INSPECTION [L3] | ||
| Brakes | |||
| Bleeding Sequence | AIR BLEEDING | ||
| Disc Brakes | |||
| Service Specifications | BRAKES TECHNICAL DATA | ||
| Torque | See Torque Specifications in appropriate graphics under CONVENTIONAL BRAKE SYSTEM . | ||
| Charging | |||
| Generator | GENERATOR INSPECTION [L3] | ||
| Torque | See Torque Specifications in appropriate graphics under CHARGING SYSTEM (L3) . | ||
| Drive Belts | |||
| Adjustment | DRIVE BELT REPLACEMENT [L3] | ||
| Belt Routing | DRIVE BELT INSPECTION [L3] | ||
| Engine Cooling | |||
| General Service Specifications | ENGINE TECHNICAL DATA [L3] | ||
| Radiator Cap Pressure | 14-18 psi | ||
| Thermostat R & I | THERMOSTAT REMOVAL/INSTALLATION [L3] | ||
| Water Pump R & I | WATER PUMP REMOVAL/INSTALLATION [L3] | ||
| Engine Mechanical | |||
| 2.3L 4-Cyl. (L3) | |||
| Compression | COMPRESSION INSPECTION [L3] | ||
| Oil Pressure | 49-86 psi (337-591 kPa; 3.44-6.03 kg/cm2 ) at 3,000 RPM. | ||
| Overhaul | See appropriate graphic under ENGINE TECHNICAL DATA . | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate/Drive Plate Torque | |||
| Automatic Transmission | 70.9-75.9 Ft. Lbs. (96.1-103 N.m) | ||
| Manual Transmission | 79.7-85.5 Ft. Lbs. (108-116 N.m) | ||
| Fuel System | |||
| Pressure Specification | 50.8-59.4 psi (350-410 kPa; 3.57-4.18 kg/cm2 ) | ||
| Fuel Pressure Test Procedure | FUEL LINE PRESSURE INSPECTION [L3] | ||
| Fuel Filter Location and R & I | Fuel filter is included in fuel pump unit. See FUEL PUMP UNIT REMOVAL/INSTALLATION [L3] . | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires (Resistance) | The 2.3L engine is equipped with coil-on-plug ignition. | ||
| Ignition Wires (Routing) | The 2.3L engine is equipped with coil-on-plug ignition. | ||
| Spark Plug | |||
| 2.3L 4-Cyl. (L3) (NGK ITR5F13) | |||
| Gap | 0.049-0.053 in. (1.25-1.35 mm) | ||
| Torque | 8-10 Ft. Lbs. (10-14 N.m) | ||
| Starting | |||
| Starter | STARTER INSPECTION [L3] | ||
| Torque | See Torque Specifications in appropriate graphics under STARTER REMOVAL/INSTALLATION [L3] . | ||
| Wheel Alignment | |||
| Adjustment Specifications | |||
| Front | FRONT WHEEL ALIGNMENT | ||
| Rear | REAR WHEEL ALIGNMENT | ||
| Torque | See Torque Specifications in text under WHEEL ALIGNMENT . | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 65-87 Ft. Lbs. (88-118 N.m) | ||