LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 5 Touring, 2.3 3, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System (L3) >> Fuel Injector Removal/Installation >> Notes

Fuel Injector Removal/Installation: Notes

  1. Follow " BEFORE SERVICE PRECAUTION " before performing any work operations to prevent fuel from spilling from the fuel system.
  2. Remove the plug hole plate.
  3. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3] ).
  4. Disconnect the negative battery cable.
  5. Disconnect the fuel injector connector.
  6. Remove in the order indicated in the table.
    FUEL INJECTOR REMOVING ORDER

    1 Quick release connector
    01-14-13 QUICK RELEASE CONNECTOR REMOVAL/INSTALLATION [L3]).
    2 Fuel distributor
    3 Injector clip
    (See FUEL INJECTOR REMOVAL NOTE ).
    4 Fuel injector
    (See FUEL INJECTOR INSTALLATION NOTE ).
  7. Install in the reverse order of removal.
  8. Inspect all related parts by performing " AFTER SERVICE PRECAUTION ".
    Fig 1: Fuel Injector & Torque Specification
    G04315943Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals