LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 5 Sport, 2.3 L, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Front Inner Handle Removal/Installation

Front Inner Handle Removal/Installation

  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3] ).
  2. Disconnect the negative battery cable.
  3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION ).
  4. Using a flathead screwdriver, press and hold the tab in the direction indicated by arrow (1), and remove the shaft by pulling it in the direction indicated by arrow (2).
  5. Pull off the inner handle, and remove the door lock knob cable and inner handle cable.
  6. Install in the reverse order of removal.
    Fig 1: Removing Door Lock Knob Cable And Inner Handle Cable
    G04317207Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals