DTC P0767: Notes

• When any of DTC P0731, P0732, P0734, and P0741 are not output, and all conditions below are satisfied.
  • ATF temperature 20 °C {68 °F} or more 
  • Driving in 3GR at D or M range
  • Engine running
  • Turbine speed within 225-4,987 RPM 
  • Differential gear case (output) revolution speed 35 RPM or more 
  • Revolution ratio of forward clutch drum revolution to differential gear case revolution 0.848 or less  or 2.185 or more 
  • None of the following DTCs are present: P0706, P0707, P0708, P0712, P0713, P0715, P0720, P0751, P0752, P0753, P0756, P0757, P0758, P0761, P0762, P0763, P0766, P0767, P0768, P0771, P0772, P0773

Diagnostic support note: 

• This is a continuous monitor (CCM).
• The MIL does not illuminate.
• The PENDING CODE is available if the PCM detects the above malfunction condition during the first drive cycle.
• FREEZE FRAME DATA is available.
• The AT warning light illuminates.
• The DTC is stored in the PCM memory.

• ATF level low
• Deteriorated ATF
• Shift solenoid D stuck
• Control valve stuck
• PCM malfunction