PJB Self-Test
- Connect the M-MDS to the DLC-2.
- Set up the M-MDS (including the vehicle recognition).
- Verify the following vehicle conditions:
- Ignition switch is at ON position.
- All the switches are turned off (except the ignition switch).
- All the doors, hood, and trunk lid or liftgate are closed.
- All the doors, and trunk lid or liftgate are unlocked.
- Parking brake lever is pulled.
Courtesy of MAZDA MOTORS CORP.
- Perform procedures according to directions on the M-MDS screen.
- Verify if any DTCs are displayed.
- If any DTCs are displayed, perform the troubleshooting according to the corresponding DTC inspection.
- Disconnect the M-MDS.