LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 3 i, 2.0 F, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle [Shift Mechanism] >> Selector Lever Component Removal/Installation >> Selector Lever Component Installation Note

Selector Lever Component Installation Note

  1. Insert the location pin of selector lever component to the hole of the floor.
  2. Tighten the selector lever component installation bolts.

    Tightening torque 7.8-10.8 N.m 

    {80-110 kgf.cm, 69.5-95.4 in.lbf} 

    Fig 1: Inserting Location Pin Of Selector Lever Component To Hole Of Floor
    G04956153Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals