LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 3 i, 2.0 F, Automatic >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> On-Board Diagnostic (Restraints) >> DTC Display

DTC Display

  1. Connect the M-MDS to the DLC-2 connector.
  2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
    • When using the IDS (laptop PC)
      • Select the "Toolbox" tab.
      • Select "Self Test".
      • Select "Modules".
      • Select "RCM".
    • When using the PDS (Pocket PC)
      • Select "Module Tests".
      • Select "RCM".
      • Select "Self Test".
        Fig 1: Identifying DLC-2 Connector
        G04956421Courtesy of MAZDA MOTORS CORP.
  3. Verify the DTC according to the directions on the screen.
    • If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.
  4. After completion of repairs, clear all DTCs stored in the SAS control module. (See CLEARING DTC ).
scientia non olet · About LEMON Manuals