DTC Inspection (PJB)

Connect the M-MDS to the DLC-2.
After the vehicle is identified, select the following items from the initial screen of the M-MDS.
When using the IDS (laptop PC)
- Select the "Toolbox" tab.
- Select "Self Test".
- Select "Modules".
- Select "GEM".
When using the PDS (Pocket PC)
- Select "Module Tests".
- Select "GEM".
- Select "Self Test".
  
  Fig 1: Identifying DLC-2 Connector
  Courtesy of MAZDA MOTORS CORP.
Verify the DTC according to the directions on the screen.
- If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.
After completion of repairs, clear all DTCs stored in the PJB.