LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> 3 Mazdaspeed, 2.3 L >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Front Door Glass Removal/Installation

Front Door Glass Removal/Installation

  1. Adjust the door glass position as shown in the figure.
  2. Disconnect the negative battery cable. (Vehicles with power window system)
  3. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION .)
  4. Remove the regulator handle. (Vehicles with manual window system) (See REGULATOR HANDLE REMOVAL ).
  5. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
  6. Remove the front door speaker. (See FRONT DOOR SPEAKER REMOVAL/INSTALLATION .)
    Fig 1: Identifying Door Glass Adjusting Dimension
    G04956703Courtesy of MAZDA MOTORS CORP.
    NOTE:
    • For installing the front door glass, the front door speaker must be removed to align the glass edge with the glass run channel by hand, through the speaker installation hole.
  7. Remove the hole cover.
  8. Remove the screws.
  9. Lift the front door glass up and remove it while tilting it in the direction of the arrow.
  10. Install in the reverse order of removal.
    Fig 2: Locating Front Door Glass And Hole Covers
    G04956704Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals