Chain Sprockets: Assembly

Fig 1: Installing No.16 Reverse/Overdrive Ring Gear Bearing Using Special Tool

Courtesy of MAZDA MOTORS CORP.

Position the No. 16 reverse/overdrive ring gear bearing on the special tools.
- Position the bearing with the part number facing toward the handle of the special tool.
  NOTE:
  - The identification stamping of the bearing goes to the outboard side of the reverse/overdrive ring gear.

Fig 2: Installing No.16 Verse/Overdrive Ring Gear Bearing Using Special Tool

Courtesy of MAZDA MOTORS CORP.

Using the special tools, install the No. 16 reverse/overdrive ring gear bearing.

Fig 3: Installing No.17 Stator Support Bearing Using Special Tool
Courtesy of MAZDA MOTORS CORP.
Position the No. 17 stator support bearing on the special tools.
- Position the bearing with the part number facing toward the handle of the special tool.
  
  Fig 4: Installing No.17 Stator Support Bearing Into Stator Support Sprocket Using Special Tool
  Courtesy of MAZDA MOTORS CORP.
  NOTE:
  - The identification stamping of the bearing goes to the outboard side of the reverse/overdrive ring gear.
Using the special tools, install the No. 17 stator support bearing into the stator support sprocket.