LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> Tribute s, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Cooling System [2.3L]) >> Cooling System Flushing

Cooling System Flushing

WARNING: This page is about a different variant/trim than selected.
  1. Drain the cooling system. See COOLING SYSTEM DRAINING, FILLING AND BLEEDING  .
  2. Remove the water thermostat. See THERMOSTAT AND THERMOSTAT HOUSING - 2.3L  .
  3. Install the water hose connection without the water thermostat.
    NOTE:
    • See the Pro Flush and Fill®, coolant flush and fill operating instructions for specific vehicle hook-up.
  4. Using the Pro Flush and Fill® SST  , flush the engine and radiator. Use premium cooling system flush.
  5. Install the water thermostat.
  6. Backflush the heater core if necessary.
  7. Fill the cooling system. See COOLING SYSTEM DRAINING, FILLING AND BLEEDING  .
scientia non olet · About LEMON Manuals