LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> MX-5 Miata Base >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic [Engine Control System] >> OBD-II Drive Mode >> PCM Adaptive Memory Production Drive Mode

PCM Adaptive Memory Production Drive Mode

  1. Start the engine and warm it up completely.
  2. Verify the following conditions and correct if necessary:
    • All accessory loads (A/C, headlights, blower fan, rear window defroster) are off.
  3. Perform no load racing at the engine speed shown in Fig 1, then idle the engine for more than 60 s  after the cooling fan has stopped. If possible, monitor RPM PID for engine speed during this procedure.
    Fig 1: PCM Adaptive Memory Production Drive Mode Graph
    G04317690Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals