LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> MX-5 Miata Base >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System (Advanced Keyless System) >> Keyless Receiver Removal/Installation >> Rear

Keyless Receiver Removal/Installation: Rear

  1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
  2. Remove the trunk side trim. (See TRUNK SIDE TRIM REMOVAL/INSTALLATION .)
  3. Remove the nuts.
  4. Disconnect the connector.
  5. Remove the keyless receiver (rear).
  6. Fig 1: Removing/Installing Keyless Receiver - Rear
    G04323539Courtesy of MAZDA MOTORS CORP.
  7. Install in the reverse order of removal.