LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> MPV ES >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Buckle Switch Inspection [Standard Deployment Control System] >> Driver's Seat

Driver's Seat

  1. Disconnect the buckle switch connector.
  2. Inspect for continuity between the buckle switch terminals using an ohmmeter.
    • If not as specified, replace the front buckle.
    Fig 1: Buckle Switch Continuity Table
    G04329241Courtesy of MAZDA MOTORS CORP.
    Fig 2: Buckle Switch Connector Terminals
    G04329242Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals