LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> MPV ES >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> On-Board Diagnostic [Engine Control System (AJ)] >> On-Board Diagnostic Test >> Pending Trouble Code Access Procedure

Pending Trouble Code Access Procedure

  1. Perform the necessary vehicle preparation and visual inspection.
  2. Connect WDS or equivalent to the vehicle DLC-2 16-pin connector located on the left side of the center console.
  3. Retrieve PENDING trouble codes  by WDS or equivalent.
Fig 1: Locating DLC-2 Connector
G04328323Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals