Shift Linkage Check

NOTE:

Some vehicles equipped with automatic transmissions have wiring to the clutch pedal position (CPP) switch. If the CPP wiring harness and jumper plug are present, See SYMPTOM TROUBLESHOOTING CHART - AUTOMATIC TRANSMISSION EXTERNAL CONTROLS , .

Check for a misadjustment in shift linkage by matching the detents in the transmission range selector lever with those in the transmission. If they match, the misadjustment is in the indicator. Do not adjust the shift linkage. Hydraulic leakage at the manual control valve can cause delay in engagements and/or slipping while operating if the linkage is not correctly adjusted. See SHIFT CABLE AND BRACKET ADJUSTMENT , for shift linkage adjustment.