DTC P0602: Notes

DTC P0602 DETECTION CONDITION AND POSSIBLE CAUSES

DTC P0602

PCM programming error

DETECTION CONDITION

No configuration data in PCM
NOTE:
- When the configuration is completed, DTC P0602 is cleared.

Diagnostic support note

This is a continuous monitor (CCM).
MIL illuminates if PCM detects the above malfunction condition during first drive cycle.
PENDING CODE is available if PCM detects the above malfunction condition.
FREEZE FRAME DATA is available.
DTC is stored in PCM memory.

POSSIBLE CAUSE

Complete configuration has not been completed.
PCM malfunction