LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 5 Sport, 2.3 L, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System (L3) >> Fuel Injector Removal/Installation >> Notes

Fuel Injector Removal/Installation: Notes

  1. Follow "BEFORE SERVICE PRECAUTION" before performing any work operations to prevent fuel from spilling from the fuel system. (See BEFORE SERVICE PRECAUTION ).
  2. Remove the plug hole plate.
  3. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [L3] ).
  4. Disconnect the negative battery cable.
  5. Disconnect the fuel injector connector.
  6. Remove in the order indicated in the table.
    FUEL INJECTOR REMOVING ORDER

    1 Quick release connector
    01-14-13 QUICK RELEASE CONNECTOR REMOVAL/INSTALLATION [L3]).
    2 Fuel distributor
    3 Injector clip
    (See FUEL INJECTOR REMOVAL NOTE ).
    4 Fuel injector
    (See FUEL INJECTOR INSTALLATION NOTE ).
  7. Install in the reverse order of removal.
  8. Inspect all related parts by performing "AFTER SERVICE PRECAUTION". (See AFTER SERVICE PRECAUTION ).
    Fig 1: Fuel Injector & Torque Specification
    G04315943Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals