LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 5 Sport, 2.3 3, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Fuel System (L3)) >> Before Service Precaution >> Fuel Line Safety Procedure

Fuel Line Safety Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove the fuel-filler cap to release the pressure inside the fuel tank.
  2. Remove the fuel pump relay.
  3. Start the engine.
  4. After the engine stalls, crank the engine several times. 
  5. Turn the ignition switch to the LOCK position.
  6. Install the fuel pump relay.
    Fig 1: Installing Fuel Pump Relay
    G04315918Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals