LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 3 i, 2.0 F, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Knock Sensor (KS) Inspection Note >> Resistance Inspection

Resistance Inspection

  1. Disconnect the knock sensor connector.
  2. Measure resistance between KS terminals A and B.
    • If not within the specification, replace the KS.
    • If the monitor item status/specification (reference) is not within the specification, even though the KS resistance is within the specification, perform the Circuit Open/Short Inspection .

      Resistance 

      Approx. 4.87 megohms 

scientia non olet · About LEMON Manuals