LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 3 i, 2.0 F, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Heated Oxygen Sensor (Ho2S) Removal/Installation >> Wiring Harness Bracket Installation Note

Wiring Harness Bracket Installation Note

NOTE:
  • There might be no pin. If there is no pin, lock the wiring harness bracket against rotation and tighten the nut.
Fig 1: Identifying Harness Bracket
G04313915Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals