LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 3 i, 2.0 F, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Clutch Pedal Position (CPP) Switch Inspection >> Continuity Inspection

Continuity Inspection

  1. Remove the CPP switch.
  2. Verify that the continuity between CPP switch terminals A and B is as indicated in the table.
    • If there is no malfunction, perform the Circuit Open/Short Inspection .
    • If there is any malfunction, replace the CPP switch.
      MEASURED CONDITION AND CONTINUITY

      Measurement condition Continuity
      Push the rod. No continuity
      Except above Continuity detected
      Fig 1: Removing CPP Switch
      G04313879Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals