LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 3 i, 2.0 F, Standard >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass/Windows/Mirrors >> Power Window Sub-Switch Removal/Installation

Power Window Sub-Switch Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the clips B using a flathead screwdriver wrapped with protective tape.
  3. Remove the switch panel from the door trim while sliding it in the direction of the arrow as shown in the figure.
  4. Disconnect the power window sub-switch connector.
    Fig 1: Removing Switch Panel From Door Trim
    G04315059Courtesy of MAZDA MOTORS CORP.
  5. Remove the screws, then remove the power window sub-switch.
  6. Install in the reverse order of removal.
    Fig 2: Removing Power Window Sub-Switch
    G04315060Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals