Selector Cable Installation Note

Install the selector cable to the selector lever securely.
Install the selector cable to the bracket securely.
NOTE:
- Steps 3 and 4 are for the selector cable replacement only.
Verify that the selector lever is in the P position.

Fig 1: Installing Selector Cable To Bracket
Courtesy of MAZDA MOTORS CORP.
Lock the lock piece and safety lock of the selector cable (selector lever side) in the order as shown in the figure.

Fig 2: Identifying Lock Piece And Safety Lock Of Selector Cable
Courtesy of MAZDA MOTORS CORP.
Verify that the manual shaft is in the P position.
CAUTION:
- Bending the selector cable in the manner shown in the figure will damage the cable and it may become loose when shifted. When installing the selector cable, hold it straight.
  
  Fig 3: Verifying Manual Shaft Is In P Position
  Courtesy of MAZDA MOTORS CORP.
Install the clip as shown in the figure.
NOTE:
- Install the selector cable to the manual shaft cable with the clip side of the selector cable end facing the front of the vehicle.
  
  Fig 4: Installing Clip
  Courtesy of MAZDA MOTORS CORP.
Install the selector cable to the manual shaft lever in such a way that the selector cable does not bear a load.
Confirm that the end of the manual shift lever projects from the end of the selector cable.
Install the selector cable to the selector cable bracket securely.

Fig 5: Installing Selector Cable To Selector Cable Bracket
Courtesy of MAZDA MOTORS CORP.