Check code 22
CHECK CODE 22 CHART
| Check code 22 | Fuel level signal | ||
|---|---|---|---|
| STEP | INSPECTION CONDITION | DISPLAY | ACTION |
| 1 | Select check code 22 with the fuel gauge sender unit connector disconnected. | Go to the next step. | |
| Except above | Replace the instrument cluster. | ||
| 2 | Connect terminals 2U and 2W of the instrument cluster. | Go to the next step. | |
| Except above | Replace the instrument cluster. | ||
| 3 | Using the SST (Fuel and thermometer checker) or resistor, input 20 ohms between instrument cluster terminals 2U and 2W. | Go to the next step. | |
| Except above | Replace the instrument cluster. | ||
| 4 | Using the SST (Fuel and thermometer checker) or resistor, input 100 ohms between instrument cluster terminals 2U and 2W. | Go to the next step. | |
| Except above | Replace the instrument cluster. | ||
| 5 | Using the SST (Fuel and thermometer checker) or resistor, input 200 ohms between instrument cluster terminals 2U and 2W. | Inspect the fuel gauge sender unit. | |
| Except above | Replace the instrument cluster. | ||