LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2006 >> 3 i, 2.0 F, Automatic >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Instrument Cluster Input/Output Check Mode >> Check Code Inspection >> Check code 08

Check code 08

CHECK CODE 08 CHART

Check code 08 TNS relay ON/OFF signal
STEP INSPECTION CONDITION DISPLAY ACTION
1 Turn the headlight switch to the TNS position. (TNS relay ON)
G04315487
 Go to the next step.
G04315488
 Verify that the voltage of instrument cluster terminal 1L is B+. 
  • If the voltage is as specified, replace the instrument cluster.
  • If the voltage is not as specified, inspect the following parts:
    • TNS relay
    • Wiring harness (Battery-TNS relay-instrument cluster)
2 Turn the headlight switch off. (TNS relay OFF)
G04315489
 Verify that the voltage of the instrument cluster terminal 1L is 1.0 V or less. 
  • If the voltage is as specified, replace the instrument cluster.
  • If the voltage is not as specified, inspect the following parts:
    • TNS relay
    • Wiring harness (TNS relay-instrument cluster)
G04315490
 Input signal to the instrument cluster is normal.
scientia non olet · About LEMON Manuals