Pinpoint Test 6: Flash With Last Switch Pressed, But No Dynamic Pull Occurs At Throttle And The Speed Control Is Inoperative
PINPOINT TEST 6: FLASH WITH LAST SWITCH PRESSED
| PINPOINT TEST 6 | FLASH WITH LAST SWITCH PRESSED, BUT NO DYNAMIC PULL OCCURS AT THE THROTTLE AND THE SPEED CONTROL IS INOPERATIVE | ||
|---|---|---|---|
| STEP | INSPECTION | ACTION | |
| 1 | CHECK THE SPEED CONTROL CABLE
|
Yes | GO to the next step. |
| No | CONNECT the cruise control cable. TEST the system for normal operation. | ||
| 2 | CHECK FOR A STICKING OR BINDING SPEED CONTROL CABLE
|
Yes | INSTALL a new cruise control actuator. See SPEED CONTROL ACTUATOR . TEST the system for normal operation. |
| No | REPAIR or INSTALL a new cruise control cable. See SPEED CONTROL CABLE -- 2.3L . REPEAT the self-test. |
||