General Specifications
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Front Disc Brake | |
| Brake pad minimum thickness | 3.0 mm (0.118 inch) |
| Brake pad maximum thickness variation (pad-to-pad) | 2.0 mm (0.079 inch) |
| Brake pad maximum taper wear (in any direction) | 3.0 mm (0.118 inch) |
| Brake disc minimum thickness (base brake system) | 22 mm (0.86 inch) |
| Brake disc minimum thickness to machine (base brake system) | 22.6 mm (0.88 inch) |
| Brake disc minimum thickness (4 wheel disc brake system) | 24 mm (0.95 inch) |
| Brake disc minimum thickness to machine (4 wheel disc brake system) | 24.6 mm (0.97 inch) |
| Brake disc lateral runout | 0.1 mm (0.004 inch) |
| Rear Disc Brake | |
| Brake pad minimum thickness | 3.0 mm (0.118 inch) 2.0 mm (0.079 inch) |
| Brake pad maximum thickness variation (pad-to-pad) | |
| Brake pad maximum taper wear (in any direction) | 3.0 mm (0.118 inch) |
| Brake disc minimum thickness | 11 mm (0.43 inch) |
| Brake disc minimum thickness to machine | 11.6 mm (0.45 inch) |
| Brake disc lateral runout | 0.1 mm (0.004 inch) |
| Rear Drum Brake | |
| Brake shoe minimum thickness | 1.0 mm (0.03 inch) |
| Brake drum maximum diameter | 230.1 mm (9.05 inch) |
| Lubricant | |
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1 (Canada CPM-1) | ESA-M6C25-A |
| High Temperature Nickel Anti-Seize Lubricant XL-2 (Canada CXG-2) | ESE-M12A4-A |
| Silicone Brake Caliper Grease and Dielectric Compound XG-3-A | ESE-M1C171-A |
| Brake Parts Cleaner PM-4 | - |