LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> RX-8 Sport, 1.3 N >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition System >> Ignition Coil Removal/Installation

Ignition Coil Removal/Installation

  1. Remove the engine cover. (See ENGINE COVER REMOVAL/INSTALLATION .)
  2. Remove the battery cover.
  3. Remove the negative battery cable. (See BATTERY REMOVAL/INSTALLATION .)
  4. Remove the air cleaner duct. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION .)
  5. Remove in the order indicated in the table.
    Fig 1: Removing Ignition Coils With Torque Specification
    G03702007Courtesy of MAZDA MOTORS CORP.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals