LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> RX-8 Sport, 1.3 N >> Repair and Diagnosis (Single Page) >> Electrical >> Horns >> Instrumentation/Driver Info >> Instrument Cluster Input/Output Check Mode >> Check Code Inspection >> Check code 18

Check code 18

CHECK CODE 18 DIAGNOSTIC PROCEDURES

Check code 18 Ignition key illumination on/off signal
INSPECTION CONDITION DISPLAY ACTION
After selecting check code 18, wait for approx. 2 8. on (FLASHING) Ignition key illumination flashes three times. The ignition key illumination is normal.
Except above Verify that the voltage of the instrument cluster terminal 1 K is B+.
  • If the voltage is as specified, replace the instrument cluster.
  • If the voltage is not as specified, replace the following parts:
    • Ignition key illumination
    • Wiring harness (Battery-ignition key illumination- instrument cluster)
scientia non olet · About LEMON Manuals