LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> RX-8 Sport, 1.3 N >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting System >> Flasher Control Module Removal/Installation

Flasher Control Module Removal/Installation

  1. Disconnect the negative battery cable.
  2. Disconnect the connector.
  3. Remove the screw and then remove the flasher control module.
  4. Install in the reverse order of removal.
    Fig 1: Removing Screw And Flasher Control Module
    G03703304Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals