LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> RX-8 Sport, 1.3 N >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting System >> DRL Control Module Removal/Installation

DRL Control Module Removal/Installation

  1. Disconnect the negative battery cable.
  2. Disconnect the connectors.
  3. Remove the screw and then remove the DRL control module.
  4. Install in the reverse order of removal.
    Fig 1: Removing Screw And DRL Control Module
    G03703306Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals