LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> RX-8 Sport, 1.3 N >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting System >> Auto Leveling Control Module Removal/Installation

Auto Leveling Control Module Removal/Installation

  1. Disconnect the negative battery cable.
  2. Disconnect the connector.
  3. Remove the screw and then remove the auto leveling control module.
  4. Install in the reverse order of removal.
    Fig 1: Removing Screw And Auto Leveling Control Module
    G03703298Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals