Front Buckle Switch Inspection: Driver-Side

1. Disconnect the negative battery cable.
2. Disconnect the buckle switch connector.
3. Verify continuity as indicated in the table.
   • If not as indicated in the table, replace the front buckle.

Manual seat 

Fig 1: Manual Seat Continuity Chart

Courtesy of MAZDA MOTORS CORP.

Fig 2: Inspecting Manual Seat (Front Buckle Switch) Continuity

Courtesy of MAZDA MOTORS CORP.

Power seat 

Fig 3: Power Seat (Front Buckle Switch) Continuity Chart

Courtesy of MAZDA MOTORS CORP.

Fig 4: Inspecting Power Seat (Front Buckle Switch) Continuity

Courtesy of MAZDA MOTORS CORP.