LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> RX-8 Sport, 1.3 3 >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Pump Resistor Removal/Installation

Fuel Pump Resistor Removal/Installation

  1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION .)
  2. Remove the secondary air injection (AIR) pump. (See SECONDARY AIR INJECTION (AIR) PUMP REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the table.
  4. Install in the reverse order of removal.
    Fig 1: Removing/Installation Fuel Pump Resistor With Torque Specifications
    G03701913Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals