LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> MX-5 Miata LS, Automatic >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Starter Inspection >> No Load Test

No Load Test

  1. Verify that the battery is fully charged.
  2. Connect the starter, battery, voltmeter, and ammeter as shown in the figure.
    Fig 1: Connecting Starter, Battery, Voltmeter, And Ammeter
    G03637908Courtesy of MAZDA MOTORS CORP.
  3. Operate the starter and verify that it turns smoothly.
  4. Measure the voltage and current while the starter is operating.
    • If not as specified, repair or replace the inner parts.
      NO LOAD TEST SPECIFICATION

      Voltage (V) 11
      Current (A) 90 or less
scientia non olet · About LEMON Manuals