LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> MX-5 Miata Base, Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Steering Gear And Linkage Disassembly/Assembly >> Holder Assembly Note

Holder Assembly Note

  1. Apply grease to the U-gasket and O-ring.
  2. Assemble the U-gasket and O-ring into the holder.
  3. Assemble the holder using the SST  .
    Fig 1: Assembling Holder
    G03638505Courtesy of MAZDA MOTORS CORP.
  4. Stake the holder to the cylinder using a punch.
    Fig 2: Staking Holder To Cylinder Using A Punch
    G03638506Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals