Resistance Inspection

NOTE:

Perform the following test only when directed.

Disconnect the fuel injector connectors.
Measure the resistance of the fuel injector using an ohmmeter.
- If as specified but the On-vehicle Inspection failed, perform the "CIRCUIT OPEN/SHORT INSPECTION ".
- If not as specified, replace the fuel injector. (See FUEL INJECTOR REMOVAL/INSTALLATION (+)
Resistance
1. 12-13 ohms (20°C {68°F})
Fig 1: Measuring Resistance Of Fuel Injector Using Ohmmeter
Courtesy of MAZDA MOTORS CORP.