Brakes Technical Data
BRAKES TECHNICAL DATA SPECIFICATION
| Item | Specification | ||
|---|---|---|---|
| CONVENTIONAL BRAKE SYSTEM | |||
| Brake pedal | Brake pedal height | (mm {in}) | 171-181 {6.74-7.12} |
| Brake pedal play | (mm {in}) | 4.0-12.0 {0.16-0.47} | |
| Pedal-to-floor clearance | (mm {in}) | 95 {3.7} min. | |
| Power brake unit | Fluid pressure when pedal depressed at 196 N {20 kgf, 44 lbf} (kPa {kgf/cm2, psi}) |
At 0 kPa {0 mmHg, 0 inHg} | 740 {7.55, 107} |
| At 66.7 kPa {500 mmHg, 19.7 inHg} | With ABS (BP with TC (vehicle equipped with 17 inch wheel)):4,700 {48,683} With ABS (vehicle equipped with 15 and 16 inch wheel):7,200 {73,1,038} Without ABS (vehicle equipped with 16 inch wheel):4,700 {48,683} Without ABS (vehicle equipped with 15 inch wheel):7,200 {73, 1,038} |
||
| Dual proportioning valve | Bend portion | (kPa {kgf/cm2, psi}) | 3,923 {40, 569} +/- 294 {3, 43} |
| Rear wheel pressure when master cylinder pressure is 5,884 kPa {60 kgf/cm2, 853 psi} | 4,844 {49.4, 702} +/- 392 {4, 57} | ||
| (kPa {kgf/cm2, psi}) | |||
| Front disc brake | Minimum disc pad thickness | (mm {in}) | 2.0 {0.08} |
| Minimum disc plate thickness | (mm {in}) | Disc plate outer diameter 255 mm {10.0 in}:18.0 {0.71} Disc plate outer diameter 270 mm {10.6 in}:20.0 {0.79} |
|
| Disc plate runout limit | (mm {in}) | 0.05 {0.002} | |
| Rear disc brake | Minimum disc pad thickness | (mm {in}) | 2.0 {0.08} |
| Minimum disc plate thickness | (mm {in}) | 8.0 {0.31} | |
| Disc plate runout limit | (mm {in}) | 0.05 {0.002} | |
| Brake fluid | Type | SAE J1703 or FMVSS 116 DOT3 | |
| PARKING BRAKE SYSTEM | |||
| Parking brake lever | Lever stroke when pulled at 98 N {10 kgf, 22 lbf} (notches) | 5-7 | |
| ANTILOCK BRAKE SYSTEM | |||
| ABS wheel-speed sensor | Clearance between sensor and rotor | (mm {in} | 0.3-1.1 {0.012-0.043} |