LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> MX-5 Miata Base, Automatic >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Seat Belt Removal/Installation

Seat Belt Removal/Installation

WARNING:
  • Handling the front seat belt (pre-tensioner seat belt) improperly can accidentally deploy the pre-tensioner, which may seriously injure you. Read SERVICE WARNINGS before handling the front seat belt. (See AIR BAG SYSTEM SERVICE WARNINGS .)
CAUTION:
  • The ELR has a spring that will unwind if the retractor's cover is removed. The spring cannot be rewound by hand. If this occurs, the ELR will not work properly. Therefore, do not disassemble the retractor.
  1. Disconnect the negative battery cable.
  2. Remove the quarter trim. (See QUARTER TRIM REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the table.
    Fig 1: Removing Seat Belt
    G03638661Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.