LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> MPV ES >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Mat Set End Plate Removal/Installation

Mat Set End Plate Removal/Installation

  1. Turn the weatherstrip over.
  2. Disengage clips A and pins B using a fastener remover, and remove the mat set end plate.
    Fig 1: Removing Mat Set End Plate
    G03701337Courtesy of MAZDA MOTORS CORP.
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals